JNTUK R16 4-1 Finite Element Methods Material PDF Download

JNTUK R16 4-1 Finite Element Methods Material PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 4-1 Finite Element Methods Material/Notes PDFs below.

jntuk-materials

JNTUK R16 4-1 Finite Element Methods Material PDF Download

OBJECTIVES:

  • To learn basic principles of finite element analysis procedure
  • To learn the theory and characteristics of finite elements that represent engineering structures
  • To learn and apply finite element solutions to structural, thermal, dynamic problem to develop the knowledge and skills needed to effectively evaluate finite element analyses performed by others
  • Learn to model complex geometry problems and solution techniques.

UNIT-1

Introduction to finite element method, stress and equilibrium, strain – displacement relations, stress – strain relations, plane stress and plane strain conditions, variational and weighted residual methods, concept of potential energy, one dimensional problems.

Download UNIT-1 Material PDF

UNIT-2

Discretization of domain, element shapes, discretization procedures, assembly of stiffness matrix, band width, node numbering, mesh generation, interpolation functions, local and global coordinates, convergence requirements, treatment of boundary conditions.

Download UNIT-2 Material PDF

UNIT-3

Analysis of Trusses: Finite element modelling, coordinates and shape functions, assembly of global stiffness matrix and load vector, finite element equations, treatment of boundary conditions, stress, strain and support reaction calculations. Analysis of Beams: Element stiffness matrix for Hermite beam element, derivation of load vector for concentrated and UDL, simple problems on beams.

Download UNIT-3 Material PDF | Reference-2

UNIT-4

Finite element modelling of two dimensional stress analysis with constant strain triangles and treatment of boundary conditions, formulation of axisymmetric problems.

Download UNIT-4 Material PDF | Reference-2

UNIT-5

Higher order and isoparametric elements: One dimensional quadratic and cubic elements in natural coordinates, two dimensional four noded isoparametric elements and numerical integration.

Download UNIT-5 Material PDF | Reference-2

UNIT-6

Steady state heat transfer analysis : one dimensional analysis of a fin and two dimensional analysis of thin plate, analysis of a uniform shaft subjected to torsion. Dynamic Analysis: Formulation of finite element model, element consistent and lumped mass matrices, evaluation of eigen values and eigen vectors, free vibration analysis.

Download UNIT-6 Material PDF | Reference-2


TEXT BOOKS:

  1. The Finite Element Methods in Engineering / SS Rao / Pergamon.

REFERENCE BOOKS:

  1. Finite Element Method with applications in Engineering / YM Desai, Eldho & Shah /Pearson publishers
  2. An introduction to Finite Element Method / JN Reddy / McGraw Hill
  3. The Finite Element Method for Engineers – Kenneth H. Huebner, Donald L. Dewhirst, Douglas E. Smith and Ted G. Byrom / John Wiley & sons (ASIA) Pte Ltd.
  4. Finite Element Analysis: Theory and Application with Ansys, Saeed Moaveniu, Pearson Education
  5. Finite Element Methods / Chen
  6. Finite Element Analysis: for students & Practicing Engineers / G.Lakshmi Narasaiah / BSP Books Pvt. Ltd.

OUTCOMES:

  • Understand the concepts behind variational methods and weighted residual methods in FEM
  • Identify the application and characteristics of FEA elements such as bars, beams, plane and isoparametric elements, and 3-D element .
  • Develop element characteristic equation procedure and generation of global stiffness equation will be applied.
  • Able to apply Suitable boundary conditions to a global structural equation, and reduce it to a solvable form.
  • Able to identify how the finite element method expands beyond the structural domain, for problems involving dynamics, heat transfer, and fluid flow.

JNTUK R16 4-1 CAD/CAM Material/Notes PDF Download

JNTUK R16 4-1 CAD/CAM Material/Notes PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 4-1 CAD/CAM Material/Notes PDFs below.

jntuk-materials

JNTUK R16 4-1 CAD/CAM Material/Notes PDF Download

OBJECTIVES:

  • Understand the basic fundamentals of computer aided design and manufacturing.
  • To learn 2D & 3D transformations of the basic entities like line, circle, ellipse etc
  • To understand the different geometric modeling techniques like solid modeling, surface modeling, feature based modeling etc. and to visualize how the components look like before its manufacturing or fabrication
  • To learn the part programming, importance of group technology, computer aided process planning, computer aided quality control
  • To learn the overall configuration and elements of computer integrated manufacturing systems.

UNIT-1

Computers in industrial manufacturing, product cycle, CAD / CAM Hardware, basic structure, CPU, memory types, input devices, display devices, hard copy devices, storage devices.

COMPUTER GRAPHICS: Raster scan graphics coordinate system, database structure for graphics modeling, transformation of geometry, 3D transformations, mathematics of projections, clipping, hidden surface removal.

Download UNIT-1 Material PDF | Reference-2

UNIT-2

GEOMETRIC MODELING: Requirements, geometric models, geometric construction models, curve representation methods, surface representation methods, modeling facilities desired.

DRAFTING AND MODELING SYSTEMS: Basic geometric commands, layers, display control commands, editing, dimensioning, solid modelling.

Download UNIT-2 Material PDF | Reference-2

UNIT-3

PART PROGRAMMING FOR NC MACHINES: NC, NC modes, NC elements, CNC machine tools, structure of CNC machine tools, features of Machining center, turning center, CNC Part Programming: fundamentals, manual part programming methods, Computer Aided Part Programming. Direct Numerical Control, Adaptive Control.

Download UNIT-3 Material PDF | Reference-2

UNIT-4

GROUP TECHNOLOGY: Part family, coding and classification, production flow analysis, types and advantages. Computer aided processes planning – importance, types. FMS-Introduction, Equipment, Tool management systems, Layouts, FMS Control

Download UNIT-4 Material PDF | Reference-2

UNIT-5

COMPUTER AIDED QUALITY CONTROL: Terminology used in quality control, use of computers in Quality control. Inspection methods- contact and noncontact types, computer aided testing, integration of CAQC with CAD/CAM.

Download UNIT-5 Material PDF | Reference-2

UNIT-6

COMPUTER INTEGRATED MANUFACTURING SYSTEMS: Types of manufacturing systems, machine tools and related equipment, material handling systems, material requirement planning, computer control systems, human labor in manufacturing systems, CIMS benefits.

Download UNIT-6 Material PDF | Reference-2


TEXT BOOKS:

  1. CAD / CAM Principles and Applications/PN Rao / McGraw-Hill
  2. Automation, Production systems & Computer integrated Manufacturing/ M.P. Groover/Pearson Education

REFERENCE BOOKS:

  1. Mastering CAD / CAM / Ibrahim Zeid / McGraw-Hill
  2. Principles of Computer Aided Design and Manufacturing / Farid Amirouche / Pearson
  3. Computer Numerical Control Concepts and programming / Warren S Seames / Thomson learning, Inc
  4. Product manufacturing and cost estimation using CAD/CAE/ Kuang Hua Chang/Elsevier Publishers

OUTCOMES:

  • Describe the mathematical basis in the technique of representation of geometric entities including points, lines, and parametric curves, surfaces and solid, and the technique of transformation of geometric entities using transformation matrix
  • Describe the use of GT and CAPP for the product development
  • Identify the various elements and their activities in the Computer Integrated Manufacturing Systems.

JNTUK R16 4-1 Mechatronics Material PDF Download

JNTUK R16 4-1 Mechatronics Material PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 4-1 Mechatronics Material/Notes PDFs below.

jntuk-materials

JNTUK R16 4-1 Mechatronics Material PDF Download

OBJECTIVES:

  • The main objective of this course is to introduce the integrative nature of Mechatronics. To describe the different components and devices of mechatronics systems.

UNIT-1

Mechatronics systems – elements & levels of mechatronics system, Mechatronics design process, system, measurement systems, control systems, microprocessor-based controllers, advantages and disadvantages of mechatronics systems. Sensors and transducers, types, displacement, position, proximity, velocity, motion, force, acceleration, torque, fluid pressure, liquid flow, liquid level, temperature and light sensors.

Download UNIT-1 Material PDF

UNIT-2

Solid state electronic devices – PN junction diode, BJT, FET, DIAC, TRIAC and LEDs. Analog signal conditioning, operational amplifiers, noise reduction, filtering.

Download UNIT-2 Material PDF

UNIT-3

Hydraulic and pneumatic actuating systems – Fluid systems, Hydraulic systems, and pneumatic systems, components, control valves, electro-pneumatic, hydro-pneumatic, electro-hydraulic servo systems. Mechanical actuating systems and electrical actuating systems – basic principles and elements.

Download UNIT-3 Material PDF

UNIT-4

Digital electronics and systems, digital logic control, micro processors and micro controllers, programming, process controllers, programmable logic controllers, PLCs versus computers, application of PLCs for control.

Download UNIT-4 Material PDF

UNIT-5

System and interfacing and data acquisition – Data Acquisition Systems, Analog to Digital and Digital to Analog conversions; Digital Signal Processing – data flow in DSPs, block diagrams, typical layouts, Interfacing motor drives.

Download UNIT-5 Material PDF

UNIT-6

Dynamic models and analogies, System response. Process Controllers – Digital Controllers, Programmable Logic Controllers, Design of mechatronics systems & future trends.

Download UNIT-6 Material PDF


TEXT BOOKS:

  1. MECHATRONICS Integrated Mechanical Electronics Systems/KP Ramachandran, GK Vijaya Raghavan & MS Balasundaram/WILEY India Edition

REFERENCE BOOKS:

  1. 1 Mechatronics /Smaili A, Mrad F/ Oxford Higher Education, Oxford University Press
  2. Mechatronics Source Book / Newton C Braga/Thomson Publications,Chennai.
  3. Mechatronics – N. Shanmugam / Anuradha Agencies Publishers.
  4. Mechatronics System Design / Devdas shetty/ Richard/ Thomson.
  5. Mechatronics/ M.D.Singh/ J.G.Joshi/PHI.
  6. Mechatronics – Electronic Control Systems in Mechanical and Electrical Engg. 4th Edition / W. Bolton/ Pearson, 2012
  7. Mechatronics – Principles and Application / Godfrey C. Onwubolu/Elsevier, Indian print

OUTCOMES:

  • After completion of this course, the student shall be able to use the various mechatronics systems devices and components in the design of electro mechanical systems.

JNTUK B.Tech 1-2 Sem (R19) Regular Question Papers Dec 2020

JNTUK 1-2 Question Papers 2020:JNTUK B.Tech 1-2 Sem (R19) Regular Question Papers Dec 2020, JNTU Kakinada I Year II Semester r19 regulation Question Papers 2020 download.

JNTUK B.Tech 1-2 Sem (R19) Regular Question Papers Dec 2020

JNTUK B.Tech 1-2 Sem (R19) Regular Question Papers Dec 2020

JNTUK B.Tech 1-2 Semeter R19 Regulation Regular examination question papers December 2020 are uploaded below. Click on the respective subject name to Download required question papers. All branches that is ECE, EEE, Civil, CSE, Mechanical JNTUK B.Tech 1-2 Regular question papers are Updated.

NOTE:- All Branches Question papers are updated. Remaining Branches Subjects also updated soon. Any subject link not working, write comment below.

ENGLISH

MATHEMATICS-II

MATHEMATICS- III

APPLIED PHYSICS

ENGINEERING CHEMISTRY

DIGITAL LOGIC DESIGN

FUNDAMENTALS OF COMPUTERS

PROGRAMMING FOR PROBLEM SOLVING USING C

ELECTRICAL CIRCUIT ANALYSIS-I

BASIC ELECTRICAL AND ELECTRONICS ENGINEERING

BASIC ELECTRICAL ENGINEERING

ENGINEERING MECHANICS

NETWORK ANALYSIS

JNTUK B.Tech 2-2 Sem (R16) Regular/Supply Question Papers Nov 2020

JNTUK 2-2 Question Papers 2020: JNTU Kakinada B.Tech 2-2 Sem (R16) Regular/Supply Exam Previous Question Papers Nov 2020, jntu kakinada 2-2 supply Old previous question papers download.

JNTUK 2-2 Question Papers 2019

JNTUK B.Tech 2-2 Sem (R16) Regular/Supply Question Papers Nov 2020

JNTUK B.Tech 2-2 Semeter R16 Regulation Regular/Supplementary examination question papers November 2020 are uploaded below. Click on the respective subject name to Download required question papers. All branches that is, ECE, EEE, Civil, CSE, Mechanical JNTUK B.Tech 2-2 question papers are Updated.

NOTE:- All Branches 2-2 Question papers are updated. Remaining Branches QP's also update soon. Any subject link not working, feel free to leave your comment below.

CIVIL ENGINEERING

BUILDING PLANNING AND DRAWING

HYDRAULICS AND HYDRAULIC MACHINERY

TRANSPORTATION ENGINEERING-I

CONCRETE TECHNOLOGY

STRUCTURAL ANALYSIS – I

STRENGTH OF MATERIALS- II

ELECTRONICS & COMMUNICATIONS ENGINEERING

MANAGEMENT SCIENCE

PULSE AND DIGITAL CIRCUITS

EM WAVES AND TRANSMISSION LINES

ELECTRONIC CIRCUIT ANALYSIS

CONTROL SYSTEMS

ANALOG COMMUNICATIONS

COMPUTER SCIENCE& ENGINEERING (CSE)

SOFTWARE ENGINEERING

JAVA PROGRAMMING

ADVANCED DATA STRUCTURES

COMPUTER ORGANIZATION

FORMAL LANGUAGES AND AUTOMATA THEORY

PRINCIPLES OF PROGRAMMING LANGUAGES

ELECTRICAL AND ELECTRONICS ENGINEERING (EEE)

MANAGEMENT SCIENCE

SWITCHING THEORY AND LOGIC DESIGN

ELECTRICAL MEASUREMENTS

CONTROL SYSTEMS

POWER SYSTEMS-I

ELECTRICAL MACHINES-II

Information Technology (IT)

E- COMMERCE

COMPUTER GRAPHICS

OBJECT ORIENTED ANALYSIS AND DESIGN USING UML

MECHANICAL ENGINEERING (ME)

KINEMATICS OF MACHINERY

THERMAL ENGINEERING –I

PRODUCTION TECHNOLOGY

DESIGN OF MACHINE MEMBERS-I

INDUSTRIAL ENGINEERING AND MANAGEMENT

MACHINE DRAWING

Download More JNTUK B.Tech 2-2 Regular/Supply Question Papers

IBPS Clerk Prelims Result 2021 (Declared) – CRP Clerk X Cutoff Marks, Score card @ ibps.in

IBPS Clerk Prelims Result 2020-2021, Selected candidates List Download : Institute of Banking Personnel Selection (IBPS) has organized the Common Written Examination (CWE) IX clerk examination on December 5th, 12th, 13th, 2020 . Lakhs of aspirants applied for IBPS Clerk Posts have taken part in the examination. All the hopefuls competed for the IBPS CWE Clerk X Preliminary examination have already checked with the answer keys released by IBPS to estimate the score.

Candidates have to qualify the IBPS CWE Clerk X preliminary test to be sorted out for next round, mains examination. Competitors those have already checked with the answer key to estimating the probable score in the examination. Candidates appeared for the test are eagerly waiting to check the results of IBPS Clerk CWE 10 Preliminary test. Candidates can shortly check their result from the IBPS Official website, ibps.in. Look forward to more details from the following article.

IBPS Clerk Prelims Result 2021 – Download Cutoff Marks, Score card at ibps.in

IBPS Clerk Prelims Result 2019

The Institute of Banking Personnel releases various job notifications to hire the suitable candidates for various bank jobs. This year the IBPS has released the notification for 2557 Clerk posts. Candidates aspiring to get bank jobs have competed for the IBPS Clerk posts 2020-2021. The selection process will be held through written test (preliminary and Mains) and personal interview/GD rounds. Candidates need to qualify in each round of selection process to appear for the next round of the selection process.

IBPS Clerk Prelims Result 2021, Selection List – Important Details

Name of AuthorityInstitute of banking Personnel
No of Posts2557
Name of the PostClerk Posts
Selection ProcedurePrelims, Mains, Interview, Document Verification
Exam DateDecember 5th, 12th, 13th 2020
IBPS Clerk Prelims Result 2020 Release DateReleased on 6th February 2021
Official Websiteibps.in

The IBPS has conducted the Clerk preliminary examination on December 5th, 12th, 13th across India in morning and afternoon shifts. Almost all the applicants have attempted the test in their allotted examination centers. Candidates, those have appeared for the test are eager to check the results. The IBPS usually releases the results within 3-4 weeks after the examination. Hence the results are expected to release on 31st December/  first week of January 2021 (Tentatively). Hence the candidates those have appeared for the examination have to keep checking the IBPS Official website, ibps.in to download the results. The result date will be soon updated by the IBPS on its official portal. Refer the IBPS official portal on frequent basis to know the updates.

IBPS Clerk CWE Prelims Results 2021, Cutoff Marks, Merit List

The IBPS is going to release the IBPS Clerk Cutoff Marks/qualifying marks. Applicants have to score the qualifying marks to get qualified in the exam. Based on the merit of aspirants, the candidates will be sent for next round, mains examination. Candidates have to score the category-wise and section-wise cutoff marks to clear the examination. Applicants clearing the test will be listed in IBPS CWE Clerk Merit List 2021. Aspirants can check the details of IBPS Clerk Cutoff Marks, Merit list at the time of results.

IBPS Clerk Prelims Score Card 2021Available Now

IBPS Clerk Prelims Result 2021Available Now

IBPS Clerk Prelims Cutoff Marks & Selection List PDFAvailable Now

How to Check IBPS Clerk Prelims Exam Result 2021 Online?

  • Visit the IBPS official website, ibps.in
  • On the homepage click on the IBPS Clerk Results 2021 link.
  • Enter the details of register number, password etc.
  • Click on Submit button.
  • The result appears on screen.
  • Check the result, cutoff marks, and merit list.
  • Take a printout of the result if needed for further reference.
IS IBPS Clerk Prelims Result 2021 Released?

Yes, IBPS Clerk prelims Result Released on 6th February.

How can i Check My IBPS Clerk Result for Prelims Exam?

People should follow above mentioned steps after announcement of result.

What is the Negative Marking in the Exam?

1/4th marks will be deducted for every wrong answer.

What are the IBPS Clerk Prelims Cutoff Marks 2020-21?

Official Cutoff Marks Category wise Will be released today.

AP ICET Final Phase Counselling Dates 2020 Rank Wise, Certificate Verification @ apicet.nic.in

AP ICET Final Phase Counselling Dates 2020 Rank Wise, Processing Fee Payment, Certificate verification, Online Apply Procedure, Colleges web option entry, eligibility, certificates to be produced, fee details, allotment order and all other details refer the detailed notification given below or available on the ap icet official website https://apicet.nic.in. Candidates can check ap icet 2020 web counselling schedule here.

AP ICET Final Phase Counselling Dates 2020 Rank Wise, Certificate Verification @ apicet.nic.in

Eligible Candidates of APICET-2020 are informed to exercise the options using their old password and Login ID No. for the leftover seats now available and consequential vacancies that may arise in the process of allotment if any, from Help Line Centre or Internet facility (Cafe/Home) as per the schedule given below. The candidates who have not attended certificate verification during first Phase should get their certificates verified on 09-02-2021 or 10.02.2021 from anyone of the Help line center and exercise options till 6.00 PM of 10-02-2021 as per the ranks mentioned below

NOTE: Candidates who will attend certificate verification first time have to pay processing fee online before he/she attends certificate verification

ap icet 2020 counselling

AP ICET Counselling Dates 2020:

S. No.EventsImportant Dates
1.Processing Fee, Document/ Certificate Verification09-02-2021 to 10-02-2021
2Web Option Entry (For College Selection)09-02-2021 to 10-02-2021
3Options will be frozen
4ICET Seat Allotment (Phase 2)12.02.2021 after 6.00 PM.

PROCESSING FEE TO BE PAID**

(Before Certificate Verification)

1. Processing Fee: Rs.1200/- (for OC/BC) and Rs. 600/- (for SC/ST) through online by credit card/ debit card/ (or) net banking through the “ Pay Processing Fee” link in the web site https://apicet.nic.in.

2. All the candidates from 1 to Last Rank can pay the processing fee from 24.01.2021 onwards using URL https://apicet.nic.in

3. For payment of processing fee, please visit https://apicet.nic.in and click on Pay Processing Fee.

4. Enter APICET Hall Ticket number and rank and click on pay fee online.

5. The candidate will be directed to payment gateway.

6. Select any one mode of payment i.e credit card or debit card or net banking and enter credentials.

7. Once the payment is success click on print button and take a print out and produce at the time of verification of certificates.

8. Candidate shall note that he/she shall have paid the processing fee when candidate attends for certificate verification as per the schedule and ranks mentioned against each date. i.e the processing fee should be paid online by the candidate before he/she attends certificate verification.

SCHEDULE FOR CERTIFICATE VERIFICATION AND OPTION ENTRY

ap icet 2020 final phase schedule

Instructions on exercising the options in the final phase counseling:

The following category of candidates can exercise options in the final phase counseling.

The Candidates

a) Candidates who have secured seats but not interested to join.

b) Who have not secured seat so far, but got their certificates verified.

c) Who have not exercised the options so far, but got their certificates verified.

d) Who have secured seats, reported and aspiring for a better option.

e) Who have reported/Not reported but cancelled their 1st Phase allotment.

f) Who have not attended for Certificate verification earlier should get their certificates verified on 09.02.2021 or 10.02.2021 from any Help Line Center and exercise options.

Note: 1. Options given in the 1st Phase will not be considered for allotment and candidates have to exercise option afresh. 2. Candidates who are satisfied with their previous allotment need not exercise option once again. They shall note that if they exercise options now and a seat is allotted as per the options, the vacated seat will be allotted to the next meritorious candidate and hence they will have no claim on previous allotment. 3. Allotments will be placed on the website on 12.02.2021 after 6.00 PM. 4. For other details please visit: https://apicet.nic.in . 5. It is advised to exercise options for interested colleges/courses assuming that vacancies would arise in all colleges in the process of sliding.

CERTIFICATES TO BE PRODUCED AT THE TIME OF VERIFICATION:

All original certificates and two sets of Xerox copies.

1) AP-ICET-2020 Hall Ticket

2) AP ICET-2020 Rank Card

3) Transfer Certificate ( T.C)

4) Degree Marks Memos / consolidated marks memo

5) Degree Provisional Certificate

6) Intermediate Marks Memo / Diploma Marks memo

7) S.S.C or its equivalent Marks memo

8) Study Certificates from IX to Degree

9) Residence Certificate (in case where candidate has no institutionalizededucation) in respect of Private candidates of AP and Telangana states

10) Residence certificate of either of the parent in AP for 10 years excluding theperiod of employment outside Andhra Pradesh from the competent authority in respect of Non-Local Candidates.

11) Income Certificate issued after 01.01.2016 or Ration Card holders containing the name of the candidate

12) Caste Certificate issued by competent authority in respect of SC/ST/BC

13) Aadhar Card (will be returned after verification).

14) Local status certificate if applicable i.e a candidate who migrates to any partof the state of Andhra Pradesh from the state of Telangana within a period of Five years from the 2nd day of June, 2014 shall be regarded as the local candidate in the state of Andhra Pradesh.

Certificates to be produced by PH/CAP/NCC/Sports/Minority Candidates:

a) PH – Certificate issued by the District Medical Board. Candidates with 40% and above disability are only eligible.

b) CAP – Certificate issued by ZillaSainik Welfare Officer (In case of Ex-Service men) Identity card and Service Discharge book for verification. Candidates whose parents are domicile of Andhra Pradesh are only eligible to be considered under “CAP” Category.

c) NCC & Sports – To produce Original Certificates issued by competent authorities.

d) Minorities: SSC ‘TC’ containing Minority Status or Certificate from the Head Master.

e) Anglo-Indian: A Certificate issued by Competent Authority of their place of Residence.

Note: Original Certificates need not be deposited in the college at the time  of admission.

Eligibility to MBA and MCA courses: Candidates who secured 50% (For OC) and 45% (SC/ST/BC) aggregate marks in Degree or its equivalent examination are only eligible for admission.

List of Help Line Centers:-

1. Government, Polytechnic ,Srikakulam

2. MRAGR Government Polytechnic, Vizianagram

3. Government Institute of Chemical Engineering, Visakhapatnam

4. Jawaharlal Nehru Technological University, Kakinada.

5. S.M.V.M Polytechnic, Tanuku, West Godavari dist

6. SRR & CVR Govt Degree College, Vijayawada.

7. Acharya Nagarjuna University, Guntur.

8. D.A. Government Polytechnic, Ongole

9. Government Polytechnic, Venkateswarapuram, Nellore

10. Sri Venkateswara University, Old MBA Building, Tirupathi.

11. Jawaharlal Nehru Technological University, Ananthapuram.

12. E.S.C. Government Polytechnic, Nandyala

13.YSR Engineering College, Proddatur.

Download the Official Notification

AP EAMCET BiPC Counselling Dates 2020 Rank Wise, Certificates Verification @ apeamcetb.nic.in

AP EAMCET BiPC Counselling Dates 2020 Rank Wise, Certificates Verification, web options, seat allotment details are available at apeamcetb.nic.in. The Qualified and eligible candidates of APEAMCET-2020 ( Bi.P.C stream) desirous of seeking admission into B.Pharmacy, Pharma-D, B.E./B.Tech(Bio-Technology and Pharmaceutical Engg) Courses are informed that the web counseling process comprising payment of processing fee, certificate verification & Option entry will be conducted from 08-02-2021 onwards. The candidates are instructed to follow guidelines/Instructions to proceed for web counseling process.

AP EAMCET BiPC Counselling Dates 2020 Rank Wise, Certificates Verification @ apeamcetb.nic.in

ap eamcet bipc counselling notification 2020

Qualified and eligible candidates of APEAMCET-2020(Bi.P.C. Stream) are informed to participate in web counseling for the seats available in Pharmacy colleges in the State of Andhra Pradesh(both University and Private) for the academic year 2020-21 on payment of processing fee as given below.

Payment of Processing fee: 

Rs.1200/- (for OC/BC) and Rs. 600/- (for SC/ST) through online by credit card/ debit card/ (or) net banking through the “ Pay Processing Fee” link in the web site https://apeamcetb.nic.in.

All the candidates from 1 to Last Rank can pay the processing fee from 08.02.2021 onwards using URL https://apeamcetb.nic.in .

  • Processing fee can be paid through online using credit card or debit card or through internet banking.
  • Enter URL https://apeamcetb.nic.in and click on “Pay Processing Fee “
  • Enter APEAMCET Hall Ticket number and rank and click on “Pay Fee Online. “
  • The candidate will be directed to payment gateway.
  • Select any one mode of payment i.e credit card or debit card or net banking and enter credentials.
  • Once the payment is success click on print button and take a print out.

Important Note: During the payment of processing fee sometimes due to network delays payment made by the candidate may not be successful. In such cases candidates need to pay the processing fee once again and amount debited due to the failure transaction will be remitted back into the respective account within 4 working days from the date of payment. If the excess payments are not remitted in 4 working days candidate has to send information like Hall ticket number, Transaction Id, Date of Payment etc to the Email Id: cetsrefund2020@gmail.com and action will be taken immediately for refund. Candidates are requested to note that only one payment will be taken and excess paid will be refunded automatically.

Verification of Certificates:

  • On payment of processing fee, Registration number and Login ID number will be provided through SMS for the Mobile number furnished at the time of filing the application or modified mobile number to all such candidates whose certificate data is already verified through web services. For candidates whose certificate data is incomplete an SMS is sent to attend for verification of certificates at HLC.
  • On confirmation of the displayed data, candidate can create password.
  • Login ID, Hall Ticket number, date of birth and password already created can be used to enter the options from Internet facility available at Home/Internet Café/Helpline Center.
  • In respect of candidates whose data is incomplete/ not verified the registration tab will not be opened and a message saying your certificates not verified please contact nearest Help Line Centers for certificate verification such candidates have to visit nearest help line centre and get the certificates verified and proceed for option entry.
  • Candidates are informed that the verification of certificates viz S.S.C. memo, Intermediate marks memo, VI class to Intermediate study certificates, Caste Certificate, Income Certificate/Ration Card, Economically Weaker section(EWS) certificate, Physically Challenged Certificate, Residence Certificate have to be verified by the counseling authorities.
  • However, candidates are requested to note that these certificates were already verified through web services from the respective board/agencies based on the information furnished by the candidate while applying for APEAMCET2020 i.e., Common Entrance Test.
  • However, in some cases the verification may be incomplete. Hence the candidates are requested to note the following.
  • After payment of processing fee Click on “Verification Status

1. Enter Hall ticket Number and click on “Show” button.

2. The candidate details will be displayed and at the bottom of the screen the candidates whose certificates got verified online will get display message “ Candidate is eligible for exercising options“ all such candidates need not go to Help line centers for certificate verification and they have to proceed to option entry as per the schedule given in the notification.

3. The candidates whose certificates are not verified online will get display “candidate is not eligible” then such candidates have to go to Help line centers and get their certificates verified and they have to proceed to option entry as per the schedule given in the notification

4. If the candidate is not agreeing with the data verified, candidate is directed to visit the nearest Helpline Centre with all original certificates for verification.

5. Verified candidates need to check the Eligibility for Fee Reimbursement, if it is displayed as “NO” but you are eligible for Fee Reimbursement then after paying the Processing Fee go to the nearest Helpline Centre with Original Income Certificate/Ration card to get Fee Reimbursement Eligibility.

6. Verify the mobile number displayed in the verification status for correctness as all the counseling information will be sent to this mobile number only. If candidate wants to change his/her mobile number visit nearest Helpline Centre and request to change the mobile number in writing to HLC coordinator.

7. The Candidate is requested to verify all the details displayed and the Candidate wishes to change the data like Date of Birth, Gender, Region, Caste, Fee Exemption, Minority, Mobile Number etc approach nearby Help Line Center with Original certificates for verification.

The following is the schedule for verification of certificates:

SCHEDULE FOR CERTIFICATE VERIFICATION FOR OC/BC/SC/ST CANDIDATES(WHOSE DATA IS INCOMPLETE)

(REPORTING TIME 9.00 A.M. Everyday) AT HELP LINE CENTERS

It is informed that the other certificates of these candidates will also be verified on the dates mentioned above along with Special Reservation category Certificates. Allotments will be placed on the website on 14.02.2021 after 6.00 PM. For vacancies and other details please visit: https://apeamcetb.nic.in.

List of Help Line Centers:

1. Government Polytechnic, Srikakulam

2. MRAGR Government Polytechnic, Vizianagram

3. Government Polytechnic, Kancharapalem, Visakhapatnam

4. Andhra Polytechnic, Kakinada

5. S.M.V.M Polytechnic, Tanuku, West Godavari dist

6. Government Polytechnic, Vijayawada

7. Andhra Loyola Degree College, Near Benz Circle, Vijayawada.

8. MBTS Government Polytechnic, Nallapadu, Guntur.

9. D.A Government Polytechnic, Ongole

10. Government Polytechnic, Venkateswarapuram, Nellore

11. S.V Government Polytechnic, Tirupathi

12. Government Polytechnic for women, Kadapa

13. Government Polytechnic, Ananthapur

14. Sri G.Pulla Reddy Government Polytechnic, Kurnool

Certificates to be produced by candidates

All original Certificates and two sets of Xerox copies

1) APEAMCET-2020 Rank card.

2) APEAMCET-2020 Hall Ticket.

3) Memorandum of Marks (Inter or its equivalent).

4) Proof of Date of Birth (SSC or its Equivalent Memo).

5) Transfer Certificate ( T.C)

6) Study Certificate from VI to Intermediate

7) EWS certificate valid for the year 2020-21 from MeeSeva for OC candidates who want to claim reservation under EWS category

8) Residence Certificate of candidate for a period of 7 years preceding to qualifying examination(Inter or its equivalent examination) in case where the candidate has no institutionalized education.

9) Andhra Pradesh Residence Certificate of father/mother for a period of 10 years excluding the period of employment outside Andhra Pradesh from Tahsildar in respect of Non-Local Candidates.

10) Integrated Community Certificate, in case of BC/ST/SC issued by the competent authority.

11) Income certificate of parents from all sources issued on or after 01.01.2017 or White Ration card (candidate name and either of the parents name have to be reflected in the ration card) those who claim tuition fee reimbursement

12) Local status certificate (if applicable) i.e a candidate who migrates to any part of the state of Andhra Pradesh from the state of Telangana from 02-June-2014 to on/before 01-June2021shall be regarded as the local candidate in the state of Andhra Pradesh.

13) Candidates claiming reservation under NCC/Sports/ PH/ CAP shall bring the original certificates.

a) PH – Candidates shall submit certificate issued by the District Medical Board.

b) CAP – Candidates shall submit Certificates from the Zilla Sainik Welfare Board (viz) Discharge book & Identity card etc for Verification. Children of Ex-Service and In-Service persons who are domicile of Andhra Pradesh will alone be considered for allotment of seats under CAP Category.

c) NCC & Sports –Produce original certificates issued by competent authorities. The candidate should have represented from the state of AP.

d) Minorities – The Muslim and Christian Minority Candidates should bring TC of the SSC containing the Religion (Muslim/Christian/Other linguistic) or in the absence of TC, a Certificate issued by the Head of the Institution in which the student studied/appeared for SSC or its equivalent Examination. e) Anglo-Indian: A Certificate issued by Tahsildar of their place of Residence.

NOTE: As per the Government orders the (i) “Jagananna Vidya Deevena (RTF)” and (ii) “Jagananna Vasathi Deevena (MTF)” schemes shall be applicable to the students admitted in Pharm-D course under convener quota, either under regular or selffinance mode, in the Private Aided and Private Unaided Degree/PG Colleges from the academic year 2020-21 fresh admissions for the FIRST FOUR YEARS ONLY OUT OF 6 YEARS INTEGRATED COURSE.

AP EAMCET (BiPC) – 2020 :: Detailed Notification

JNTUK R16 3-1 TE-2 Material/Notes PDF Download

JNTUK R16 3-1 TE-2 Material/Notes PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 3-1 Thermal Engineering -II Material/Notes PDFs below.

jntuk-materials

JNTUK R16 3-1 TE-2 Material/Notes PDF Download

OBJECTIVES:

  • This course is intended to provide basic knowledge of components being used in steam and gas power plant cycles and to analyse the energy transfers and transformations in these components including individual performance evaluation.

UNIT-1

BASIC CONCEPTS: Rankine cycle – schematic layout, thermodynamic analysis, concept of mean temperature of heat addition, methods to improve cycle performance – regeneration & reheating. combustion: fuels and combustion, concepts of heat of reaction, adiabatic flame temperature, Stoichiometry, flue gas analysis.

Download UNIT-1 Material PDF

UNIT-2

BOILERS : Classification – working principles of L.P & H.P boilers with sketches – mountings and accessories – working principles, boiler horse power, equivalent evaporation, efficiency and heat balance – draught, classification – height of chimney for given draught and discharge, condition for maximum discharge, efficiency of chimney – artificial draught, induced and forced.

Download UNIT-2 Material PDF

UNIT-3

STEAM NOZZLES: Function of a nozzle – applications – types, flow through nozzles, thermodynamic analysis – assumptions -velocity of fluid at nozzle exit-Ideal and actual expansion in a nozzle, velocity coefficient, condition for maximum discharge, critical pressure ratio, criteria to decide nozzle shape: Super saturated flow, its effects, degree of super saturation and degree of under cooling – Wilson line.

STEAM TURBINES: Classification – impulse turbine; mechanical details – velocity diagram – effect of friction – power developed, axial thrust, blade or diagram efficiency – condition for maximum efficiency. De-laval turbine – methods to reduce rotor speed-velocity compounding, pressure compounding and velocity & pressure compounding, velocity and pressure variation along the flow – combined velocity diagram for a velocity compounded impulse turbine, condition for maximum efficiency

Download UNIT-3 Material PDF

UNIT-4

REACTION TURBINE: Mechanical details – principle of operation, thermodynamic analysis of a stage, degree of reaction –velocity diagram – Parson’s reaction turbine – condition for maximum efficiency – calculation of blade height.

STEAM CONDENSERS: Requirements of steam condensing plant – classification of condensers – working principle of different types – vacuum efficiency and condenser efficiency – air leakage, sources and its affects, air pump- cooling water requirement.

Download UNIT-4 Material PDF

UNIT-5

GAS TURBINES: Simple gas turbine plant – ideal cycle, essential components – parameters of performance – actual cycle – regeneration, inter cooling and reheating –closed and semi-closed cycles – merits and demerits, types of combustion chambers.

Download UNIT-5 Material PDF | Reference-2

UNIT-6

JET PROPULSION : Principle of operation –classification of jet propulsive engines – working principles with schematic diagrams and representation on t-s diagram – thrust, thrust power and propulsion efficiency – turbo jet engines – needs and demands met by turbo jet – schematic diagram, thermodynamic cycle, performance evaluation, thrust augmentation – methods.

Rockets : Application – working principle – classification – propellant type – thrust, propulsive efficiency – specific impulse – solid and liquid propellant rocket engines

Download UNIT-6 Material PDF


TEXT BOOKS:

  1. Thermodynamics and Heat Engines/R.Yadav, Volume -II /Central Publishing House
  2. Gas Turbines /V.Ganesan /TMH 3. Heat Engineering /V.P Vasandani and D.S Kumar/Metropolitan Book Company, New Delhi

REFERENCE BOOKS:

  1. Gas Turbines and Propulsive Systems /P.Khajuria & S.P.Dubey /Dhanpatrai
  2. Gas Turbines / Cohen, Rogers and Saravana Muttoo / Addison Wesley – Longman
  3. Thermal Engineering-R.S Khurmi, &J S Gupta/S.Chand.
  4. Thermal Engineering-P.L.Bellaney/ Khanna publishers.
  5. Thermal Engineering-M.L.Marthur & Mehta/Jain bros. Publishers
  6. Thermal Engineering / RK Rajput/ Lakshmi Publications

OUTCOMES:

  • After undergoing this course the student is expected to understand the working of steam and gas power plant cycles and also should be able to analyze and evaluate the performance of individual components. The student also should be in a position to understand basic principles of Jet propulsion and rocket engineering.