JNTUK R16 3-2 Computer Networks Material/Notes PDF Download

Students those who are studying JNTUK R16 CSE Branch, Can Download Unit wise R16 3-2 Computer Networks Material/Notes PDFs below.

JNTUK R16 3-2 Computer Networks Material/Notes PDF Download

OBJECTIVES:

• Understand state-of-the-art in network protocols, architectures, and applications.
• Process of networking research
• Constraints and thought processes for networking research
• Problem Formulation—Approach—Analysis—

UNIT-1

Introduction: Network Topologies WAN, LAN, MAN. Reference models- The OSI Reference Model- the TCP/IP Reference Model – A Comparison of the OSI and TCP/IP Reference Models

Download UNIT-1 Material PDF | Reference-2 | Ref-3

UNIT-2:

Physical Layer – Fourier Analysis – Bandwidth Limited Signals – The Maximum Data Rate of a Channel – Guided Transmission Media, Digital Modulation and Multiplexing: Frequency Division Multiplexing, Time Division Multiplexing, Code Division Multiplexing Data Link Layer Design Issues, Error Detection and Correction, Elementary Data Link Protocols, Sliding Window Protocols

Download UNIT-2 Material PDF | Reference-2 | Ref-3

UNIT-3:

The Data Link Layer – Services Provided to the Network Layer – Framing – Error Control – Flow Control, Error Detection and Correction – Error-Correcting Codes – Error Detecting Codes, Elementary Data Link Protocols- A Utopian Simplex Protocol-A Simplex Stop and Wait Protocol for an Error free channel-A Simplex Stop and Wait Protocol for a Noisy Channel, Sliding Window Protocols-A One Bit Sliding Window Protocol-A Protocol Using Go-Back-NA Protocol Using Selective Repeat

Download UNIT-3 Material PDF | Reference-2 | Ref-3

UNIT-4:

The Medium Access Control Sublayer – The Channel Allocation Problem-Static Channel Allocation-Assumptions for Dynamic Channel Allocation, Multiple Access Protocols-AlohaCarrier Sense Multiple Access Protocols-Collision-Free Protocols-Limited Contention ProtocolsWireless LAN Protocols, Ethernet-Classic Ethernet Physical Layer-Classic Ethernet MAC Sublayer Protocol-Ethernet Performance-Fast Ethernet Gigabit Ethernet-10-Gigabit EthernetRetrospective on Ethernet, Wireless Lans-The 802.11 Architecture and Protocol Stack-The 802.11 Physical Layer-The802.11 MAC Sublayer Protocol-The 805.11 Frame Structure-Services

Download UNIT-4 Material PDF | Reference-2 | Ref-3

UNIT-5

Design Issues-The Network Layer Design Issues – Store and Forward Packet Switching-Services Provided to the Transport layer- Implementation of Connectionless Service-Implementation of Connection Oriented Service-Comparison of Virtual Circuit and Datagram Networks, Routing Algorithms-The Optimality principle-Shortest path Algorithm, Congestion Control AlgorithmsApproaches to Congestion Control-Traffic Aware Routing-Admission Control-Traffic Throttling-Load Shedding.

Download UNIT-5 Material PDF | Reference-2 | Ref-3

UNIT-6:

Transport Layer – The Internet Transport Protocols: Udp, the Internet Transport Protocols: Tcp Application Layer –The Domain Name System: The DNS Name Space, Resource Records, Name Servers, Electronic Mail: Architecture and Services, The User Agent, Message Formats, Message Transfer, Final Delivery

Download UNIT-6 Material PDF | Reference-2 | Ref-3

TEXT BOOKS:

1. Tanenbaum and David J Wetherall, Computer Networks, 5th Edition, Pearson Edu, 2010
2. Computer Networks: A Top Down Approach, Behrouz A. Forouzan, FirouzMosharraf, McGraw Hill Education

REFERENCE BOOKS:

1. Larry L. Peterson and Bruce S. Davie, “Computer Networks – A Systems Approach” (5th ed), Morgan Kaufmann/ Elsevier, 2011

OUTCOMES:

• Understand OSI and TCP/IP models
• Analyze MAC layer protocols and LAN technologies
• Design applications using internet protocols
• Understand routing and congestion control algorithms
• Understand how internet works

JNTUK R16 3-2 Green Engineering Systems Material PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 3-2 Green Engineering Systems Material/Notes PDFs below.

JNTUK R16 3-2 Green Engineering Systems Material PDF Download

OBJECTIVES:

• The course aims to highlight the significance of alternative sources of energy, green energy systems and processes and provides the theory and working principles of probable sources of renewable and green energy systems that are environmental friendly.

UNIT-1

INTRODUCTION: SOLAR RADIATION: Role and potential of new and renewable sources, the solar energy option, Environmental impact of solar power, structure of the sun, the solar constant, sun-earth relationships, coordinate systems and coordinates of the sun, extraterrestrial and terrestrial solar radiation, solar radiation on titled surface, instruments for measuring solar radiation and sun shine, solar radiation data, numerical problems. Photo voltaic energy conversion – types of PV cells, I-V characteristics

SOLAR ENERGY COLLECTION: Flat plate and concentrating collectors, classification of concentrating collectors, orientation and thermal analysis, advanced collectors.

Download UNIT-1 Material PDF

UNIT-2

SOLAR ENERGY STORAGE AND APPLICATIONS: Different methods, sensible, latent heat and stratified storage, solar ponds, solar applications- solar heating/cooling technique, solar distillation and drying, solar cookers, central power tower concept and solar chimney.

WIND ENERGY: Sources and potentials, horizontal and vertical axis windmills, performance characteristics, betz criteria, types of winds, wind data measurement.

Download UNIT-2 Material PDF

UNIT-3

BIO-MASS: Principles of bio-conversion, anaerobic/aerobic digestion, types of bio-gas digesters, gas yield, combustion characteristics of bio-gas, utilization for cooking, bio fuels, I.C. engine operation and economic aspects.

GEOTHERMAL ENERGY: Resources, types of wells, methods of harnessing the energy, potential in India.

OCEAN ENERGY: OTEC, Principles of utilization, setting of OTEC plants, thermodynamic cycles. Tidal and wave energy: Potential and conversion techniques, mini-hydel power plants, and their economics.

Download UNIT-3 Material PDF

UNIT-4

ENERGY EFFICIENT SYSTEMS:

(A) ELECTRICAL SYSTEMS: Energy efficient motors, energy efficient lighting and control, selection of luminaire, variable voltage variable frequency drives (adjustable speed drives), controls for HVAC (heating, ventilation and air conditioning), demand site management.

(B) MECHANICAL SYSTEMS: Fuel cells- principle, thermodynamic aspects, selection of fuels & working of various types of fuel cells, Environmental friendly and Energy efficient compressors and pumps.

Download UNIT-4 Material PDF

UNIT-5

ENERGY EFFICIENT PROCESSES: Environmental impact of the current manufacturing practices and systems, benefits of green manufacturing systems, selection of recyclable and environment friendly materials in manufacturing, design and implementation of efficient and sustainable green production systems with examples like environmental friendly machining, vegetable based cutting fluids, alternate casting and joining techniques, zero waste manufacturing.

Download UNIT-5 Material PDF

UNIT-6

GREEN BUILDINGS: Definition, features and benefits. Sustainable site selection and planning of buildings for maximum comfort. Environmental friendly building materials like bamboo, timber, rammed earth, hollow blocks, lime & lime pozzolana cement, agro materials and industrial waste, Ferro cement and Ferro-concrete, alternate roofing systems, paints to reduce heat gain of the buildings. Energy management.

Download UNIT-6 Material PDF

TEXT BOOKS:

1. Solar Energy – Principles of Thermal Collection and Storage/Sukhatme S.P. and J.K.Nayak/ TMH
2. Non-Conventional Energy Resources/ Khan B.H/ Tata McGraw Hill, New Delhi, 2006
3. Green Manufacturing Processes and Systems, Edited / J. Paulo Davim/Springer 2013

REFERENCE BOOKS:

1. Alternative Building Materials and Technologies / K.S Jagadeesh, B.V Venkata Rama Reddy and K.S Nanjunda Rao/New age international
2. Principles of Solar Engineering / D.Yogi Goswami, Frank Krieth & John F Kreider / Taylor & Francis
3. Non-Conventional Energy / Ashok V Desai /New Age International (P) Ltd
4. Renewable Energy Technologies /Ramesh & Kumar /Narosa
5. Non conventional Energy Source/ G.D Roy/Standard Publishers
6. Renewable Energy Resources-2nd Edition/ J.Twidell and T. Weir/ BSP Books Pvt.Ltd
7. Fuel Cell Technology –Hand Book / Gregor Hoogers / BSP Books Pvt. Ltd.

OUTCOMES:

• The student shall understand the principles and working of solar, wind, biomass, geo thermal, ocean energies and green energy systems and appreciate their significance in view of their importance in the current scenario and their potential future applications.

JNTUK R16 3-2 Heat Transfer Material/Notes PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 3-2 Heat Transfer Material/Notes PDFs below.

JNTUK R16 3-2 Heat Transfer Material/Notes PDF Download

OBJECTIVES:

• This course is intended to impart knowledge of principles of heat transfer and analyze the heat exchange process in various modes for the evaluation of rate of heat transfer and the temperature distribution in different configurations.

UNIT-1

INTRODUCTION: Modes and mechanisms of heat transfer – basic laws of heat transfer –General discussion about applications of heat transfer.

CONDUCTION HEAT TRANSFER: Fourier rate equation – general heat conduction equation in cartesian, cylindrical and Spherical coordinates. Steady, unsteady and periodic heat transfer – initial and boundary conditions.

ONE DIMENSIONAL STEADY STATE CONDUCTION HEAT TRANSFER: Homogeneous slabs, hollow cylinders and spheres – overall heat transfer coefficient – electrical analogy – critical radius of insulationVariable thermal conductivity – systems with heat sources or heat generation

Download UNIT-1 Material PDF | Reference-2 | Ref-3

UNIT-2

extended surface (fins) heat Transfer – long fin, fin with insulated tip and short fin, application to error measurement of temperature.

ONE DIMENSIONAL TRANSIENT CONDUCTION HEAT TRANSFER: Systems with negligible internal resistance – significance of biot and fourier numbers – chart solutions of transient conduction systems

Download UNIT-2 Material PDF | Reference-2

UNIT-3

CONVECTIVE HEAT TRANSFER: Classification of convective heat transfer – dimensional analysis as a tool for experimental investigation – Buckingham Pi Theorem for forced and free convection, application for developing semi – empirical non- dimensional correlation for convective heat transfer – Significance of nondimensional numbers – concepts of continuity, momentum and Energy Equations.

Download UNIT-3 Material PDF | Reference-2

UNIT-4

FORCED CONVECTION EXTERNAL FLOWS: Concepts about hydrodynamic and thermal boundary layer and use of empirical correlations for convective heat transfer -flat plates and cylinders.

INTERNAL FLOWS: Concepts about hydrodynamic and thermal entry lengths – division of internal flow based on this –use of empirical relations for horizontal pipe flow and annulus flow.

FREE CONVECTION: Development of hydrodynamic and thermal boundary layer along a vertical plate – use of empirical relations for vertical plates and pipes.

Download UNIT-4 Material PDF | Reference-2

UNIT-5

HEAT TRANSFER WITH PHASE CHANGE BOILING: Pool boiling – regimes- calculations on nucleate boiling, critical heat flux and film boiling.

CONDENSATION: Film wise and drop wise condensation –Nusselt’s theory of condensation on a vertical plate – film condensation on vertical and horizontal cylinders using empirical correlations.

HEAT EXCHANGERS: Classification of heat exchangers – overall heat transfer coefficient and fouling factor – concepts of LMTD and NTU methods – Problems.

Download UNIT-5 Material PDF | Reference-2

UNIT-6

RADIATION HEAT TRANSFER: Emission characteristics and laws of black-body radiation – Irradiation – total and monochromatic quantities – laws of Planck, Wien, Kirchoff, Lambert, Stefan and Boltzmann– heat exchange between two black bodies – concepts of shape factor – Emissivity – heat exchange between grey bodies – radiation shields – electrical analogy for radiation networks

Download UNIT-6 Material PDF | Reference-2

TEXT BOOKS:

1. Heat Transfer /JP HOLMAN/TMH
2. Heat Transfer /P.K.Nag/ TMH
3. Principles of Heat Transfer /Frank Kreith, RM Manglik & MS Bohn/Cengage learning publishers

REFERENCE BOOKS:

1. Heat and Mass Transfer /Arora and Domkundwar/Dhanpatrai & sons
2. Fundamentals of Engg. Heat and Mass Transfer / R.C.Sachdeva / New Age International
3. Heat and Mass Transfer /Cengel/McGraw Hill.
4. Heat and Mass Transfer /D.S.Kumar / S.K.Kataria & Sons
5. A Text book on Heat Transfer-4th Edition/ S.P Sukhatme/Universities Press

OUTCOMES:

• The student after undergoing this course is expected to know the principles of heat transfer and be able to apply to practical situations where in heat exchange takes place through various modes of heat transfer including phase change.

JNTUK R16 3-2 Metrology Material/Notes PDF Download

Students those who are studying JNTUK R16 Mechanical Branch, Can Download Unit wise R16 3-2 Metrology Material/Notes PDFs below.

JNTUK R16 3-2 Metrology Material/Notes PDF Download

OBJECTIVES:

• Inspection of engineering parts with various precision instruments
• Design of part, tolerances and fits
• Principles of measuring instruments and gauges and their uses
• Evaluation and inspection of surface roughness
• Inspection of spur gear and thread elements
• Machine tool testing to evaluate machine tool quality

UNIT-1

SYSTEMS OF LIMITS AND FITS: Introduction, nominal size, tolerance, limits, deviations, fits -Unilateral and bilateral tolerance system, hole and shaft basis systems- interchangeability, determistic & statistical tolerances, selective assembly. International standard system of tolerances, selection of limits and tolerances for correct functioning.

Download UNIT-1 Material PDF | Reference-2 | Ref-3

UNIT-2

LINEAR MEASUREMENT: Length standards, end standards, slip gauges- calibration of the slip gauges, dial indicators, micrometers.

MEASUREMENT OF ANGLES AND TAPERS: Different methods – bevel protractor, angle slip gauges- angle dekkor- spirit levels- sine bar- sine table, rollers and spheres used to measure angles and tapers.

LIMIT GAUGES: Taylor’s principle – design of go and no go gauges; plug, ring, snap, gap, taper, profile and position gauges.

Download UNIT-2 Material PDF | Reference-2 | Ref-3

UNIT-3

OPTICAL MEASURING INSTRUMENTS: Tools maker’s microscope and uses – autocollimators, optical projector, optical flats and their uses.

INTERFEROMETRY: Interference of light, Michelson’s interferometer, NPL flatness interferometer, and NPL gauge interferometer.

Download UNIT-3 Material PDF | Reference-2 | Ref-3

UNIT-4

SURFACE ROUGHNESS MEASUREMENT: Differences between surface roughness and surface waviness – Numerical assessment of surface finish-CLA, Rt., R.M.S. Rz, R10 values, Method of measurement of surface finish – Profilograph, Talysurf, ISI symbols for indication of surface finish.

COMPARATORS: Types – mechanical, optical , electrical and electronic, pneumatic comparators and their uses.

Download UNIT-4 Material PDF | Reference-2 | Ref-3

UNIT-5

GEAR MEASUREMENT: Nomenclature of gear tooth, tooth thickness measurement with gear tooth vernier & flange micro meter, pitch measurement, total composite error and tooth to tooth composite errors, rolling gear tester, involute profile checking.

SCREW THREAD MEASUREMENT: Elements of measurement – errors in screw threads- concept of virtual effective diameter, measurement of effective diameter, angle of thread and thread pitch, and profile thread gauges.

Download UNIT-5 Material PDF | Reference-2 | Ref-3

UNIT-6

FLATNESS MEASUREMENT: Measurement of flatness of surfaces- instruments used- straight edges- surface plates – auto collimator.

MACHINE TOOL ALIGNMENT TESTS: Principles of machine tool alignment testing on lathe, drilling and milling machines.

Download UNIT-6 Material PDF | Reference-2 | Ref-3

TEXT BOOKS:

1. Dimensional Metrology/Connie Dotson/Cengage Learning
2. Engineering Metrology / R.K.Jain / Khanna Publishers

REFERENCE BOOKS:

1. Engineering Metrology / Mahajan / Dhanpat Rai Publishers
2. Engineering Metrology / I.C.Gupta / Dhanpat Rai Publishers
3. Precision Engineering in Manufacturing / R.L.Murthy / New Age
4. Engineering Metrology and Measurements / NV Raghavendra, L Krishna murthy/ Oxford publishers.
5. Engineering Metrology / KL Narayana/Scitech publishers

OUTCOMES:

• Students will be able to design tolerances and fits for selected product quality. They can choose appropriate method and instruments for inspection of various gear elements and thread elements. They can understand the standards of length, angles, they can understand the evaluation of surface finish and measure the parts with various comparators. The quality of the machine tool with alignment test can also be evaluated by them.

JNTUK B.Tech 3-2 R16 Mechanical Materials: Students Can Download JNTUK 3-2 MECH R16 Regulation Materials/ E Note Books / Text Books Subject Wise From Below.

JNTUK B.Tech 3-2 Sem R16 Mechanical Materials Subject Wise PDF

Students of Jawaharlal Nehru Technological University Kakinada can avail of B.Tech 3-2 can avail of the materials for R16 regulation for various branches. Students can download JNTUK B.Tech 3-2 Sem R16 Mechanical Materials Subject Wise PDF from the links provided here. By tapping on the link, one can download materials for JNTUK 3-2 Sem MECH R16. The electronics and communication engineering Students can download the subject-wise materials PDFs collected from various sources. By referring to the materials one can gain knowledge to clear the exams with a good score. The course materials include Metrology, Instrumentation & Control Systems, Refrigeration & Air-conditioning, Heat Transfer and various other Mechanical related books of various popular authors. Check the following B.Tech R16 MECH 3-2 Materials PDFs and download them for free. 

JNTUK B.Tech 3-2 Sem R16 Mechanical Course Structure:

Also Check: JNTUK 3-2 Sem R16 Mechanical Syllabus

Download JNTUK 3-2 R16 MECH Materials PDF

Students who are pursuing the B.Tech 3-2 Mechanical R16 Regulation can check the text books, reference books, and e-resourses provided here for free. Students can get the complete chapter-wise information from their respective text books. And from the following information from the e-resourses, text books from the familer authors will provide the extra knowledge and understanding of each subject. Hence ts helps to score good in exams. Here we have collaboratively given the best JNTUK 3-2 R16 MECH materials at one place for the reference of students.

Metrology Material

Instrumentation & Control Systems Material

Refrigeration & Air-conditioning Material

Heat Transfer Material

OPEN ELECTIVE

i. Entrepreneurship Material

ii. Data Base Management System Material

iii. Waste Water Management Material

iv. Computer Graphics Material Material

v. Industrial Robotics Material

vi. Green Engineering Systems Material

JNTUK B.Tech 3-2 R16 EEE Materials: Students Can Download JNTUK 3-2 EEE R16 Regulation Materials/ E Note Books / Text Books Subject Wise From Below.

JNTUK B.Tech 3-2 Sem R16 EEE Materials Subject Wise PDF

Students of Jawaharlal Nehru Technological University Kakinada can avail of B.Tech 3-2 can avail of the materials for R16 regulation for various branches. Students can download JNTUK B.Tech 3-2 Sem R16 EEE Materials Subject Wise PDF from the links provided here. By tapping on the link, one can download materials for JNTUK 3-2 Sem EEE R16. The electronics and communication engineering Students can download the subject-wise materials PDFs collected from various sources. By referring to the materials one can gain knowledge to clear the exams with a good score. The course materials include Power Electronic Controllers & Drives, Power System Analysis, Micro Processors and Micro controllers, Data Structures other EEE related books of various popular authors. Check the following B.Tech R16 EEE 3-2 Materials PDFs and download them for free. 

JNTUK B.Tech 3-2 Sem R16 EEE Course Structure:

Also Check: JNTUK 3-2 Sem R16 EEE Syllabus

Download JNTUK 3-2 R16 EEE Materials PDF

Students who are pursuing the B.Tech 3-2 EEE R16 Regulation can check the text books, reference books, and e-resourses provided here for free. Students can get the complete chapter-wise information from their respective text books. And from the following information from the e-resourses, text books from the familer authors will provide the extra knowledge and understanding of each subject. Hence ts helps to score good in exams. Here we have collaboratively given the best JNTUK 3-2 R16 EEE materials at one place for the reference of students.

Power Electronic Controllers & Drives Material

Power System Analysis Material

Micro Processors and Micro controllers Material

Data Structures Material

Open Elective

i. Unix and Shell Programming Material

ii. OOPS Through JAVA Material

iii. VLSI Design Material

iv. Robotics Material

v. Neural Networks &Fuzzy Logic Material

vi. Energy Audit and Conservation& Management Material

JNTUK B.Tech 3-2 R16 ECE Materials: Students Can Download JNTUK 3-2 ECE R16 Regulation Materials/ E Note Books / Text Books Subject Wise From Below.

JNTUK B.Tech 3-2 Sem R16 ECE Materials Subject Wise PDF

Students of Jawaharlal Nehru Technological University Kakinada can avail of B.Tech 3-2 can avail of the materials for R16 regulation for various branches. Students can download JNTUK B.Tech 3-2 Sem R16 ECE Materials Subject Wise PDF from the links provided here. By tapping on the link, one can download materials for JNTUK 3-2 Sem ECE R16. The electronics and communication engineering Students can download the subject-wise materials PDFs collected from various sources. By referring to the materials one can gain knowledge to clear the exams with a good score. The course materials include Micro Processors & Micro Controllers, Micro Wave Engineering, VLSI Design, Digital Signal Processing and various other ECE related books of various popular authors. Check the following B.Tech R16 ECE 3-2 Materials PDFs and download them for free. 

JNTUK B.Tech 3-2 Sem R16 ECE Course Structure:

Also Check: JNTUK 3-2 Sem R16 ECE Syllabus

Download JNTUK 3-2 R16 ECE Materials PDF

Students who are pursuing the B.Tech 3-2 ECE R16 Regulation can check the text books, reference books, and e-resourses provided here for free. Students can get the complete chapter-wise information from their respective text books. And from the following information from the e-resourses, text books from the familer authors will provide the extra knowledge and understanding of each subject. Hence ts helps to score good in exams. Here we have collaboratively given the best JNTUK 3-2 R16 ECE materials at one place for the reference of students.

Micro Processors & Micro Controllers Material

Micro Wave Engineering Material

VLSI Design Material

Digital Signal Processing Material

OPEN ELECTIVE

i. OOPs through Java Material

ii. Data Mining Material

iii. Industrial Robotics Material

iv. Power Electronics Material

v. Bio-Medical Engineering Material

vi. Artificial Neural Networks Material

JNTUK B.Tech 3-2 R16 CSE Materials: Students Can Download JNTUK 3-2 CSE R16 Regulation Materials/ E Note Books / Text Books Subject Wise From Below.

JNTUK B.Tech 3-2 Sem R16 CSE Materials Subject Wise PDF

Students of Jawaharlal Nehru Technological University Kakinada can avail of B.Tech 3-2 can avail of the materials for R16 regulation for various branches. Students can download JNTUK B.Tech 3-2 Sem R16 CSE Materials Subject Wise PDF from the links provided here. By tapping on the link, one can download materials for JNTUK 3-2 Sem CSE R16. The Computer Science Engineering Students can download the subject-wise materials PDFs collected from various sources. By referring to the materials one can gain knowledge to clear the exams with a good score. The course materials include Computer Networks, Data Warehousing and Mining, Design and Analysis of Algorithms, Software Testing Methodologies and various other CSE related books of various popular authors. Check the following B.Tech R16 CSE 3-2 Materials PDFs and download them for free. 

JNTUK B.Tech 3-2 Sem R16 CSE Course Structure:

Also Check: JNTUK 3-2 Sem R16 CSE Syllabus

Download JNTUK 3-2 R16 CSE Materials PDF

Students who are pursuing the B.Tech 3-2 CSE R16 Regulation can check the text books, reference books, and e-resourses provided here for free. Students can get the complete chapter-wise information from their respective text books. And from the following information from the e-resourses, text books from the familer authors will provide the extra knowledge and understanding of each subject. Hence ts helps to score good in exams. Here we have collaboratively given the best JNTUK 3-2 R16 CSE materials at one place for the reference of students.

Computer Networks Material

Data Warehousing and Mining Material

Design and Analysis of Algorithms Material

Software Testing Methodologies Material

Open Elective:

i. Artificial Intelligence Material

ii. Internet of Things Material

iii. Cyber Security Material

iv. Digital Signal Processing Material

v. Embbeded Systems Material

vi. Robotics Material

JNTUK B.Tech 3-2 R16 Civil Materials: Students Can Download JNTUK 3-2 Civil Engineering R16 Regulation Materials/ E Note Books / Text Books Subject Wise From Below.

JNTUK B.Tech 3-2 Sem R16 Civil Materials Subject Wise PDF

Students of Jawaharlal Nehru Technological University Kakinada can avail of B.Tech 3-2 can avail of the materials for R16 regulation for various branches. Students can download JNTUK B.Tech 3-2 Sem R16 Civil Materials Subject Wise PDF from the links provided here. By tapping on the link, one can download materials for JNTUK 3-2 Sem Civil R16. The electronics and communication engineering Students can download the subject-wise materials PDFs collected from various sources. By referring to the materials one can gain knowledge to clear the exams with a good score. The course materials include Design & Drawing of Steel Structures, Geotechnical Engineering – I, Environmental Engineering -I, Water Resource Engineering -I and various other Civil related books of various popular authors. Check the following B.Tech R16 Civil 3-2 Materials PDFs and download them for free. 

JNTUK B.Tech 3-2 Sem R16 Civil Course Structure:

Also Check: JNTUK 3-2 Sem R16 Civil Syllabus

Download JNTUK 3-2 R16 Civil Materials PDF

Students who are pursuing the B.Tech 3-2 Civil R16 Regulation can check the text books, reference books, and e-resourses provided here for free. Students can get the complete chapter-wise information from their respective text books. And from the following information from the e-resourses, text books from the familer authors will provide the extra knowledge and understanding of each subject. Hence ts helps to score good in exams. Here we have collaboratively given the best JNTUK 3-2 R16 Civil materials at one place for the reference of students.

Design & Drawing of Steel Structures Material

Geotechnical Engineering – I Material

Environmental Engineering -I Material

Water Resource Engineering -I Material

OPEN ELECTIVE

i. Electronic Instrumentation Material

ii. Data Base Management Systems Material

iii. Alternative Energy Sources Material

iv. Waste water Management Material

v. Fundamentals of Liquefied Natural Gas Material

vi. Green Fuel Technologies Material